Coolung unit CW COMPACT Green Line

Cleaning Keg 10L with Rubber Base, for Beer Lines The 10-liter stainless steel cleaning keg is the simplest way to clean beer lines and keg valves. The keg is equipped with a rubber base for stability. Features: 10-liter (2.64 gallon) capacity, made of high-quality stainless steel, includes rubber base for stability. Technical specifications: 1 x Type A tube with silicone suction tube, 1 x Type D tube with silicone suction tube, 1 x Cornelius type lid with 100psi pressure relief valve. Usage: Fill the cleaning keg with a mixture of StellarClean cleaner and warm water. Connect your beer tap valve similar to a regular keg and open the tap. We recommend letting the cleaning solution sit in the lines for at least 5 minutes, then rinse with warm water. For complete cleaning of lines and stainless steel taps, Stellarsan sanitizer can also be used at a ratio of 1.5 ml per 1 liter of water. Our 10L cleaning keg is fully passivated stainless steel, just like our new 19L kegs. Attention: DO NOT USE BLEACH OR CHLORINATED TSP (PINK POWDER) TO CLEAN KEGLAND STAINLESS STEEL PRODUCTS. TSP pink cleaner contains bleach which damages the stainless steel structure and causes corrosion. Suitable cleaners in proper dilution: StellarOxy, StellarClean, StellarSoda, StellarSan. The cleaning keg allows you to regularly and effectively maintain your beer system, ensuring fresh and clean beer taste always. The cleaning keg is a compact, durable, and reusable solution suitable for both home brewers and smaller bars.

Professional KeyKeg Beer Cooler With Compressor. Efficient compressor cooling system specifically designed for KeyKeg beer kegs, ensuring optimal working pressure of 2.8-3.2 bar. Technical Specifications: Quick setup time: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Cooling tube length: 13.5 meters. Equipped with 1 output tap. Device Dimensions: Width: 170 mm. Length: 280 mm. Height: 325 mm. Weight: 13 kg. Connections and Power Consumption: Hose connections: John Guest 3/8. Power: 267W. Electrical connection: 230V/50Hz/1.16A. Required accessories for installation: Connection fittings for tube and container. CO2 cylinder with pressure 2.5-2.9 bar when using metal kegs.

Professional KeyKeg Compressor Cooler - For Precise Beer Dispensing The efficient compressor cooler ensures optimal working pressure for KeyKeg barrels between 2.8-3.2 bar. The device reaches full operational capacity in just 5-8 minutes after connecting to power. Technical Features: Adjustable temperature range: +2°C to +10°C Cooling capacity: 35-40 liters per hour (maximum 50 l/h) Equipped with two output taps Total cooling pipeline length: 14 meters John Guest 5/8 connection hoses Device Specifications: Dimensions: 210 x 331 x 465 mm (L x W x H) Weight: 29.3 kg Power consumption: 1100W Power supply: 230V/50Hz/1.16A When using metal kegs, it is recommended to set the CO₂ cylinder working pressure between 2.5-2.9 bar. Note: pipe and container fittings must be purchased separately for cooler operation.

SODA PYGMY - Compact Carbonated Water Maker SODA PYGMY is a capable carbonated water maker that produces up to 25 liters of perfectly chilled sparkling or still water per hour. The unit is equipped with a precise thermostat for temperature control and two dispensing taps. Environmentally Friendly Technology GREEN LINE technology uses environmentally friendly refrigerant R-290. Energy-efficient design ensures 20% greater energy efficiency and lower power consumption. Quality Construction The unit's body and coil are made of durable stainless steel that meets the highest hygiene standards. The stainless steel drip tray makes the device convenient and hygienic to use. Technical Specifications Compressor cooling capacity: 310W (1/8 HP). Maximum cooling: 25 L/hour. Continuous cooling: 20 L/hour. Carbonated water output: 20-25 L/hour. Cooling tube length: 11.0 m. Power: 391W. Current: 1.70A. Weight: 19.0 kg. Connections Power supply: 220-240V 50Hz. Beverage connection: G 3/8. CO2 connection: 5/16.

SODA PYGMY 25 GREEN LINE - Professional Carbonated Water Maker SODA PYGMY 25 GREEN LINE is an efficient and environmentally friendly carbonated water maker that produces chilled soda water by mixing H2O and CO2. The device is ideal for under-counter installation and connection to a bar tower or external tap. Main advantages: Productivity: up to 25 liters of perfectly chilled soda water per hour Modern design and easy maintenance Ergonomic handles for safe handling Precise temperature control with thermostat Eco-friendly technology: GREEN LINE technology uses environmentally friendly refrigerant R-290 and an innovative energy-saving system. The result is 20% greater energy efficiency and lower energy consumption. Technical specifications: Compressor power: 1/8 HP Cooling capacity: 310W Continuous cooling: 20 L/hour Carbonated water output: 20-25 L/hour Cooling coil length: 10.5 m Power: 391W Weight: 17 kg Power supply: 220-240V 50Hz SODA PYGMY 25 GREEN LINE is perfectly suited for use in offices, restaurants, and manufacturing facilities, offering an optimal ratio of performance, quality, and dimensions.

Beverage cooler & carbonator Benchy 3.2L without taps, 240V. Benchy Sparkling - countertop/undercounter carbonator/cooler is the simplest way to install a sparkling water system. No ice needed, just connect the device to power, fill with glycol, connect water supply and immediately enjoy carbonated water. Benchy Sparkling is a solution that provides instantly chilled and carbonated water as needed. Simply connect the water supply and CO2 cylinder to the device and get unlimited sparkling and chilled water from the tap. Our Benchy product series is far superior to other market devices in terms of price, ease of use, and flexibility. Using the regulator, you can adjust the carbonation level to your taste, which cannot be done with other similar systems on the market. This device is also significantly more affordable and easier to install. To operate, simply: 1. Connect to power 2. Fill the internal water tank 3. Connect water supply 4. Connect CO2 cylinder 5. Dispense chilled sparkling water. It's that simple, and you can enjoy chilled sparkling water in less than an hour after installation, with rapid cooling. Ensure the device is installed and used according to the user manual found under additional information. Fully adjustable - Benchy Sparkling has an integrated digital temperature controller allowing temperature control from 0.5°C to 10°C. You can also adjust carbonation levels from 0.5 volumes to over 5 volumes for extra sparkling water. Cooling capacity - Benchy Sparkling can cool approximately 20-30 liters of sparkling water per hour (assuming ambient water and air temperature of 20°C). To increase device capacity, you can pre-cool mains water using either a refrigerated container (keg) or G40 cooler. Pre-cooling mains water can more than double Benchy Sparkling output. Technical specifications: Height: 465 mm Width: 290 mm Depth: 520 mm (excluding sight glass which can be removed) Refrigerant: r600a - (80 grams) Cooling power: 600 watts Power consumption: 155 W (standby power consumption less than 5 watts) Capacity: approximately 25 L per hour (assuming 20°C ambient temperature) Gas input: CO2 @ 2-3.5 bar (8 mm (5/16) OD tube) Water input: Must be 1 bar (15 psi) higher than gas pressure (6.35 mm (1/4") OD tube) Sparkling/chilled water output: 8 mm (5/16") OD tube. NOTE: Nukatap FC taps are sold separately for countertop installation.

Beer Cooler Compact - Efficient Cooling System for Bars and Events Professional beer cooler ensures quick and efficient beverage cooling. The device is ready for use in just 2-4 minutes after connecting to power. Technical Features: Cooling efficiency: 30 liters per hour Temperature range: +2 to +10°C Cooling tube length: 13.5 meters Equipped with one output tap Device Specifications: Dimensions: 170 x 280 x 325 mm Weight: 13 kg Power consumption: 267W Power supply: 230V/50Hz/1.16A Connections and Installation: John Guest 3/8" connection hoses CO2 cylinder working pressure: 2.5-2.9 bar Tube and tank fittings need to be purchased separately This compact and powerful cooling device is ideal for bars, restaurants, and events where optimal beverage serving temperature needs to be maintained.

Professional Dual-Tap Beer Cooler with Integrated Lighting. Discover our top-tier dual-tap beer cooler that combines modern design with functionality. The cooler is equipped with built-in ambient lighting that adds elegance to your beverage system. Technical Features and Capability: Specially designed for Keykeg systems (2.8-3.2 bar). Quick startup: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Technical Specifications: Cooling line length: 13.5 meters. Dimensions: 185 x 300 x 345 mm. Weight: 16.5 kg. Power consumption: 267W (230V/50Hz/1.16A). Connections: John Guest 3/8. Tube and tank fittings need to be purchased separately for installation. When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. This compressor cooler ensures optimal temperature and serving quality for your beverages, making it an ideal choice for both professional and home use.

KegLand Series X Professional Beer Tap System - 3 Tap Kegerator Perfect beer serving station that accommodates up to four 19-liter kegs. Energy-efficient cooling system with thick insulated walls ensures optimal beer temperature. Main components: Kegerator cooling cabinet on wheels, MK4 KegLand regulator with 8mm precision fitting, 3 Nukatap stainless steel taps, Brushed stainless steel three-tap tower. Technical solutions: EVABarrier beer lines (4x8mm), EVABarrier gas lines (5x8mm), CO2 cylinder holder (fits 2.6kg cylinder), Black drip tray. Additional equipment: Chrome guard rail, Practical shelf, 3 black plastic handles, Mounting hardware and fittings. Note: Beer kegs and CO2 cylinder not included.

Professional Carbonated Water System for Restaurants and Bars - 40L/h Compact and powerful carbonated water system that produces quality carbonated water by mixing drinking water and CO2. The device has a production capacity of 40 liters of chilled sparkling water per hour. Technical specifications: Power: 345W/1.5A, Voltage: 220-240V 50Hz~1, Weight: 10 kg, Beverage connection: G 5/8, CO2 connection: G 5/8. Main advantages: High production capacity - 40 liters per hour, Quality materials compliant with food safety standards, Compact and portable design with handle, LINDR modern cooling technology, Easy to maintain and clean. The device is an ideal solution for restaurants, cafes, and bars looking to offer freshly made sparkling water. Easily compatible with existing coolers and tap systems.

Beverage cooler & beer cooler Benchy Nitro, with two taps Unlike other nitro systems, this type of countertop nitro device extracts nitrogen from the air and mixes it with the beverage, meaning you don't need to buy nitrogen tanks. The system also cools the beverage, so all you need to do is fill the included container with your nitro cold brew coffee or cocktail mix and pour it directly through the tap. It's really that simple. Alternatively, if you want to pour nitro beer, don't use the included nitro container but use a keg instead. Fill your keg with nitrogen stout or other nitro beer. Then add a very small amount of gas pressure (maximum 1 or 2 psi) to the keg and connect the nitrogen outlet hose to the nitro dispenser. No more expensive tank rentals needed. Just plug in the device and turn it on. The machine cools down within 15 minutes and you can pour cold nitro stout with a creamy cascade effect. Features: No bulky nitrogen tank needed, two nitro taps for two product lines, slimmer design fits nicely on your counter, ready to use in minutes, draws beverages from any cold brew coffee container or keg, adjustable nitrogen gas levels, adjustable temperature control, minimal maintenance and upkeep requirements, easy to use, move and clean. Technical specifications: Power supply: 230V/50Hz, 10A IEC cable, stainless steel device, 12-month limited manufacturer warranty. Weight and dimensions: 475 mm (depth) x 205 mm (width) x 405 mm (height), 600 mm depth including taps, hose bends and drip tray, 515 mm height including tap handle height, weight: 42 kg. Benchy Nitro is an excellent solution for bars, cafes, and restaurants wanting to offer quality nitro cold beverages without the need for constant nitrogen tank replacements. The device is easy to use and maintain, ensuring consistent and creamy textured drinks.