Kegerator Series X.1, stainless steel

4-tap stainless steel serving tower Professional serving tower set, which is an ideal solution for both the Kegerator Series X model and standalone use. The brushed stainless steel tower ensures long-term durability and elegant appearance. Set includes: Stainless steel tower with 4 outputs (without taps), 4 Duotight-compatible short shanks, 4 black plastic tap handles, EVABarrier beer line (8 mm outer diameter, 4 mm inner diameter), EVABarrier gas line (8 mm outer diameter, 5 mm inner diameter), 4 Duotight quick-connect fittings (6.5 x 8 mm), 4 M5 stainless steel mounting screws. EVABarrier lines and Duotight quick-connect system allow for easy and leak-proof installation. Quality materials and well-thought-out design ensure optimal beverage serving solution.

3-Tap Beer Tower for Kegerator Series X - Professional Dispensing Kit High-quality 3-tap beer tower kit specifically designed for Kegerator Series X beer cooler. Brushed stainless steel tower ensures long service life and elegant appearance. Complete kit contents: Stainless steel tower for three outputs (without taps), 3 Duotight-compatible short tubes, 3 black plastic tap handles, EVABarrier beer line (3x8mm) and gas line (5x8mm), 3 Duotight push-in fittings (6.5x8mm), 4 M5 stainless steel mounting screws. EVABarrier tubes and Duotight quick connectors allow for easy installation and ensure leak-proof connection. The tower kit securely attaches to the beer cooler with included stainless steel screws. Professional solution for bars, restaurants, and home beer serving. Fully compatible with Kegerator Series X model, allowing simultaneous serving of three different beverages.

IceMaster G20 - Glycol Chiller - Digital Fermentation Control - (with two integrated pumps for dual temperature) IceMaster G20 is an efficient glycol chiller with excellent cooling capacity. It's compact, quiet, and ideally suited for home environments. The chiller is powerful enough to cool well-insulated fermentation vessels up to 300 liters or multiple smaller fermenters. It has 500 watts of cooling power, making it suitable for rapid cooling even in hot air temperatures in your garage or brewery. NEW! Duotight push-in sight glass! For best results from the device, we recommend using propylene glycol (ideally at about 30% concentration). Technical specifications: Refrigerant: r600a isobutane, Cooling capacity: 500 watts (0.67 hp) (rated at 22°C), Power consumption: 155 W, Tank: 16.42 L, Maximum lift height (per pump): 5 meters, Maximum flow rate (per pump): 600 L/h, Output tube size: fits 10mm internal diameter tubing, Dimensions: 510mm × 300mm × 460mm (L × W × H). Integrated pumps: Unlike other units, this device has 2 integrated pumps and temperature controllers. This allows you to independently cool two fermenters simultaneously at different temperatures. Set the main reservoir temperature to -4°C (after adding 30% glycol), then set the other two temperatures on the G20's other side to your ideal fermentation temperatures. No additional wiring needed. The pumps are included and pre-wired, ready to use. Wort cooling: Cooling wort from 100°C to 50°C is usually quite simple with tap water. However, cooling from 50°C to 18°C can take a long time. This is because your tap water can be up to 35°C, meaning it would be impossible regardless of the amount of water used to cool to 18°C (yeast pitching temperature). The IceMaster G20 solves this problem and is an easy way to use sub-zero glycol to cool your fermenters to suitable temperatures for fermentation (NOTE: only use this device for wort cooling after you have already cooled below 50°C with water, otherwise risk overloading the compressor). This unit can be used with all these cooling options: a) BrewZilla 65L immersion chiller b) Coolossus stainless steel counterflow chiller c) BrewZilla 35L chiller d) 20 plate chiller. Fermenter/Kegmenter cooling: Let's be honest. Australia is a hot country, and in many cases heating isn't necessary, but cooling is essential. Particularly larger and well-insulated fermenters often generate enough heat to warm the fermenter, which is why large commercial breweries often don't have heating. They rely on yeast activity to heat the fermenter. The G20 can be used to cool various fermenters with products like the Temp Twister. Heating: The IceMaster G20 glycol chiller can also be set up to heat the reservoir. The two temperature controllers have a push-in port to control heating of your chosen device. Note: installation of such a heating device must be done by a qualified electrician. Compressor, NOT thermoelectric: While thermoelectric glycol units are significantly cheaper to manufacture, you need compressor cooling for quick and efficient wort cooling. Compressors increase the manufacturing cost, but since they are electrically 3-6 times more efficient for this application, the initial manufacturing cost easily pays for itself in electricity savings. Additionally, compressors are significantly more powerful and can pump more heat even in hot ambient temperatures where thermoelectric units struggle. So if you want to maintain the ability to cool a fermenter quickly, compressor cooling can't be beaten. Installation requirements: This unit requires 100mm clearance around all air vents. Regular maintenance of dust around the radiator is necessary for optimal efficiency. Ideally use KegLand glycol/water ratio of 20% to achieve -8°C freezing point.

Beer Cooler Compact - Efficient Cooling System for Bars and Events Professional beer cooler ensures quick and efficient beverage cooling. The device is ready for use in just 2-4 minutes after connecting to power. Technical Features: Cooling efficiency: 30 liters per hour Temperature range: +2 to +10°C Cooling tube length: 13.5 meters Equipped with one output tap Device Specifications: Dimensions: 170 x 280 x 325 mm Weight: 13 kg Power consumption: 267W Power supply: 230V/50Hz/1.16A Connections and Installation: John Guest 3/8" connection hoses CO2 cylinder working pressure: 2.5-2.9 bar Tube and tank fittings need to be purchased separately This compact and powerful cooling device is ideal for bars, restaurants, and events where optimal beverage serving temperature needs to be maintained.

Professional Beverage Cooler - Fast and Efficient Cooling System. Compressor-free beverage cooler ensures quick and reliable drink cooling. The device is designed for professional use in bars, restaurants, and events. Technical features: Ready to use: 5-8 minutes after connecting to power. Temperature range: +2°C to +10°C. Cooling capacity: 35-40 l/h (maximum 50 l/h). Equipped with 2 output taps. Cooling tube length: 14 meters. Device specifications: Dimensions: 225 x 330 x 425 mm. Weight: 26 kg. Power consumption: 1100W/230V/50Hz/1.16A. Connection hoses: John Guest 5/8. CO2 working pressure: 2.5-2.9 bar. NB! Tube and tank connectors must be purchased separately for cooler use.

SOUDEK 50 - Professional Beer Cooler with Oak Wood Cabinet SOUDEK 50 is a high-end beer and wine cooler, ideal for both home and commercial use. The device allows simultaneous serving of two different drinks at perfectly chilled temperatures. Powerful Cooling System The cooling unit's capacity is 40-50 liters per hour, ensuring service of up to 100 cold drinks. The integrated thermostat allows precise temperature control. Quality Design and Materials High-quality oak wood cabinet, stainless steel components, compact and user-friendly design, professional beverage accessories. Technical Features The device operates with a CO2 cylinder (sold separately), ensuring optimal pressure of 2.5-2.9 bars. The compact design makes installation and maintenance easy. Applications Home parties and events, bars and restaurants, outdoor events, tastings.

Professional Carbonated Water System for Restaurants and Bars - 40L/h Compact and powerful carbonated water system that produces quality carbonated water by mixing drinking water and CO2. The device has a production capacity of 40 liters of chilled sparkling water per hour. Technical specifications: Power: 345W/1.5A, Voltage: 220-240V 50Hz~1, Weight: 10 kg, Beverage connection: G 5/8, CO2 connection: G 5/8. Main advantages: High production capacity - 40 liters per hour, Quality materials compliant with food safety standards, Compact and portable design with handle, LINDR modern cooling technology, Easy to maintain and clean. The device is an ideal solution for restaurants, cafes, and bars looking to offer freshly made sparkling water. Easily compatible with existing coolers and tap systems.

SODA CW COMPACT Water Machine - Professional Carbonated Water Producer SODA CW COMPACT is a perfect solution for producing chilled and carbonated water, ideal for offices, production facilities, and homes. The device produces up to 25 liters of quality carbonated water per hour. Technical Specifications: Production capacity: 20-25 liters per hour, Cooling capacity: 310W, Compressor power: 1/8 HP, Power consumption: 460W/2A, Cooling coil length: 11m, Weight: 21kg, Power supply: 220-240V 50Hz~1. Environmentally Friendly Technology: GREEN LINE technology uses environmentally friendly refrigerant R-290, ensuring 20% greater energy efficiency and lower power consumption. Quality Construction: Fully stainless steel housing and coil, Meets highest hygiene standards, Adjustable temperature regulator with 7 settings, Stainless steel drip tray, Quality dispensing valve for easy use, CO2 connection for threaded bottles (Tr 21x4), Beverage connection: 5/16. LINDR cooling system ensures efficient operation and long-term durability, exceeding electrical input power indicators.