RELIEF VALVE 8,9bar/130PSI

Single-stage CO2 cylinder regulator-regulator with variable output pressure control. Allows the gases leaving the cylinder to be depressurized to the required level/pressure and ensures that the pressure is kept as constant as possible at the outlet... regardless of the change in inlet pressure. The regulator is equipped with a safety valve through which excess gas released from the exhaust pressure chamber exits. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. For example, if you want to pressurize your tank with 3bar, the manometer must be in the position 10l/min, and for 2bar, 7l/min. Bar / l/min unit conversion table included. Technical data: input pressure 185bar, output pressure 0.5-10bar, output capacity 15m3/h, input thread W21.8x1 1 14, output nut thread G1/4 and pipe connection 6.3mm. 

.

Cover set includes. lid, seal, pressure relay. The product has been used and restored..

Cover set includes. lid, seal, pressure relay. The product has been used and restored..

The set includes an outlet valve, a 100cm hose, 2 clamps and a ball-lock quick connector for the KEG tank..

18.9L KEG pressure tank ball-lock quick coupling with 1/4 thread..

18.9L KEG pressure tank ball-lock nozzle..

18.9L KEG pressure tank ball-lock quick connector with 1/4 thread for liquid discharge.

Mini CO2 cylinder holder for 18.9L KEG pressure tank with 1/4 thread. The set includes a CO2 mini-balloon 1pc. Compatible with white ball-lock quick coupling with 1/4 thread (purchase separately)..

19L pressure tank lid gasket - only the gasket with a diameter of 95mm from the middle of the gasket.

18.9L KEG pressure tank ball-lock liquid discharge nozzle..

18.9L Pressure Tank Quick Connect Nozzle O-Seal..

Reducer hose connection for a hose with an inner diameter of 4mm..

8L pressure tank ball-lock connection fittings set with pressure relief valve

Nothing tastes better than a freshly poured pint. With the Beerstream, you can now dispense your beer using a pressure barrel and Sodastream-compatible CO2 cylinders. Have you wondered if a soda-keg is right for you but worried about lugging a heavy CO2 bottle and frequent refills? The Beerstream eliminates this hassle, allowing you to use Sodastream-compatible CO2 cylinders to serve your beer. You can easily set the pressure from 0-2 bar with stepless adjustment and monitor it on a clear manometer. The standard 1/4" MFL connection ensures quick and easy setup with your soda-keg. The Beerstream is incredibly user-friendly, complete with a detailed user manual. It is far more economical than using 8 or 16-gram CO2 cartridges and lets you dispense up to 6 soda-kegs with a single Sodastream cylinder. The product comes with a 3-year warranty. Included in the set: Brewferm Beerstream pressure regulator (0-2 bar), Brewferm Beerstream holder for soda-keg, 2 Duotight FFL push-in couplings (8 mm), 30 cm EVABarrier hose (8 mm), and a CO2 ball-lock connector. Note: CO2 cylinder is not included and is not compatible with pink quick-connect cylinders.

Cover set includes. lid, seal, pressure relay. The product has been used and restored..

Connects with a thread directly to the CO2 inlet of the KEG to measure the CO2 pressure in the tank. Fits 18.9L keg with thread. If necessary, the valve can be opened to reduce the pressure. Manometer 0.69...4bar..

18.9L Pressure Tank Quick Connect Nozzle O-Seal..

Nukatap vanetile grommet.

This all-new ball lock disconnect sets a new standard! The integrated duotight design allows you to connect your beer and gas lines directly, easily, and reliably without needing additional fittings or clamps. Its robust and super-compact design is incredibly easy to assemble and disassemble, making cleaning and sanitizing effortless. Made from highly chemical-resistant materials with stainless steel springs and ball bearings—no cheap ABS plastics here—this ball lock is extremely resistant to commonly used chemicals like phosphoric-based sanitizers and caustics. The small size makes it easy to stack kegs, and the new cap design ensures a pressure seal with just hand tightening. It can be completely disassembled for cleaning without any tools. The durable and compact design makes this the best value and the most well-designed quick disconnect for home brewing ever made. This specific ball lock disconnect is designed for an 8 mm gas line, and thanks to the integrated duotight fitting, the line simply pushes directly into place.