.png)
Pump 6W magnetic drive for BrewZilla Gen 3
.png){kind=small}
Professionals recommend - producers prefer!
Brand:
Unit: pc
Stock qty: Pre-order
Delivery time (day): 7-45
Delivery time within Estonia for stock items approx. 3-5 working days. NOTE! Due to the rapid price increase, prices for non-stock items may change without prior notice! Standard prices with 24% VAT.
Usage: This magnetic drive pump is the ideal pump used in RoboBrew Gen 3 and BrewZilla Gen 3.1 to 3.1.1 in both 35L and 65L models. Capable of withstanding temperatures up to 120°C, it can handle the boil directly without the need to cool before use. Extremely efficient at well under 1 amp, this pump can be run continuously at elevated temperatures. Putting pressure from restrictive flow will not hurt a magnetically driven pump—it is precisely what this pump is designed for.
Features: The input and output of the pump are 14mm OD, allowing you to connect silicon hose directly to the pump and secure with hose clamp. Not self-priming—it will need to be lower than the vessel and primed with liquid before it can push it around. Not submersible. Comes un-wired and ready to install into your own brewery or replace the RoboBrew/BrewZilla pump.
Technical data: Voltage: 220-240V at 50-60Hz. Max head: 2.1m (at 240V). Max flow: 12L/min (at 240V). Input and output size: 14mm OD (to suit hose with ID 11-13mm).
Warnings: This pump is not self-priming—it must be positioned lower than the vessel and primed with liquid before operation. It is not submersible. Do not run the pump dry for extended periods as it may impede future performance.
| Weight (kg) | 0.000000 |
| High (m) | 0 |
| Width (m) | 0 |
| Length (m) | 0 |
