.png)
Fermenter 27L FermZilla Tri-Conical Easy-Grip pressure starter kit
.png){kind=small}
Professionals recommend - producers prefer!
Brand:
Unit: pc
Stock qty: Pre-order
Delivery time (day): Eritellimustoode / Please contact / Ota yhteyttä
Delivery time within Estonia for stock items approx. 3-5 working days. NOTE! Due to the rapid price increase, prices for non-stock items may change without prior notice! Standard prices with 24% VAT.
What's Included in the Stock Standard Kit:
- 1 x KL47319 - FermZilla Easy-Grip Threaded Lid Ring
- 1 x KB03529 - Integrated Gauge BlowTie Kit (0-15psi) Spunding Valve
- 1 x KL17060 - 100cm Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float
- 2 x KL10788Y - Yellow Liquid Carbonation Caps
- 2 x KL10788 - Red Gas Carbonation Caps
- 1 x KL11402 - FermZilla Pressure Lid
- 1 x KL05333 - Red 35psi / 2.5BAR Pressure Relief Safety Valve
- 1 x KL11433 - FermZilla - Graduation Sticker 27L
- 1 x KL01618 - Strip Stick On Thermometer
- 1 x KL28240 - 27L FermZilla Tri-Conical Tank
- 1 x KL11419 - FermZilla - Conical Stainless Stand
- 1 x KL25805 - 3 Inch TC Beaded Seal - Silicone
- 1 x KL25799 - 3 Inch TC Clamp - 3 Segments
- 1 x KL27571 - 3 Inch TC x 3 Inch TC FermZilla Butterfly Valve Assembly
- 1 x KL30366 - FermZilla - 3 Inch Tri-Conical - 600ml Collection Container Kit
Please note: none of these can be changed, substituted or swapped out. If you want something different to the above, order it separately.
Usage: This particular kit is a one-click option for those who want to be able to brew a single batch under pressure with a 27L Tri-Conical FermZilla. Designed as a single batch system that goes perfectly hand in hand with the BrewZilla 35L Gen3.1.1 or Gen4 if you are looking to Brew All Grain or Partial Mash beers.
This is a very good starting point for those who are just getting into pressurisable fermenters and want to know what we would recommend to use with them. Pressure fermentation opens up a world of possibilities for the homebrewer wanting to take their beers to the next level. If you are kegging then the ability to do a closed pressure transfer straight into a keg is worth the cost of entry!
Features:
- Moulded 3 inch TC ferrule in the body of the FermZilla tank
- 3 inch Tri-Clover Butterfly Valve
- 3 Inch Tri-Clover 600mL Collection Container
- Easy-Grip Threaded Lid Ring with multiple uses
- Ability to ferment at pressures up to 2.4bar
- Transparent design allows you to see fermentation in action
- Cost-effective alternative to stainless steel conical fermenters
This kit has carbonation caps on the collection container either to purge or take samples of yeast from. We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.
⚠️ Important: When using this vessel under pressure, you must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this, fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap/Threads by tipping it upside down, in all directions where there are risks of leakage.
⚠️ Important: Occasionally these units may come with some small indentations/dimples/dents from shipping. These fermenters are designed to endure minor deformations such as this. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.
| Weight (kg) | 0.000000 |
| High (m) | 0 |
| Width (m) | 0 |
| Length (m) | 0 |
35,90 €
