Dual Pressure MK4 Regulator – Type 30

MK4 Regulator Pressure Gauge Stainless Steel Guard - Professional Solution We present a high-quality 304 stainless steel MK4 regulator protection frame that ensures long-term reliability and safety of your equipment. Product Features The MK4 regulator pressure gauge guard is made from 3mm thick 304 stainless steel, offering maximum durability for daily use. Thanks to its one-piece construction, there is no risk of rusting. Made from durable 304 stainless steel, quick installation (under 3 minutes), design precisely fitting MK4 regulator, protects against impacts and falls, ideal for portable systems. Practical Use The guard is especially necessary in cafes, bars, and other food service establishments where frequent gas cylinder changes occur. It helps prevent accidents during equipment transport and daily use. Installation Installing the protection frame is a simple and quick process. The guard slides around the gauge and securely attaches with included fasteners, providing immediate protection against external impacts. Benefits This protection frame offers the best protection for your carbonation and beverage system equipment. It helps avoid costly repairs and downtime that may occur from unprotected pressure gauge damage. Investment in a quality protection solution ensures longer equipment life and reliability in daily use.

Nylon washer 18x11.4x3.55mm, for MK4 regulator. High-quality nylon washer suitable for MK series regulators. Compatible with models MKI, MKII, MKIII and MKIV. No pipe tape needed - simply tighten the regulator firmly and the washer ensures complete hermetic seal. The nylon washer is a simple and effective solution for preventing gas leaks. The material is durable and ensures long-term use. The washer sits between the regulator and gas cylinder connection, creating an airtight seal.

CO2 Cylinder Regulator with Adjustable Output Pressure - Professional Gas Pressure Control. Precise single-stage CO2 cylinder regulator ensures reliable and stable gas pressure regulation. The device allows accurate control of gas pressure from the cylinder while maintaining consistent output pressure. Key features: Equipped with safety valve for excess gas release. Two manometers: for monitoring cylinder pressure and output pressure. Includes bar/l/min conversion table. Usage instructions: For 3 bar pressure: set to 10 l/min. For 2 bar pressure: set to 7 l/min. Technical specifications: Maximum input pressure: 185 bar. Adjustable output pressure: 0.5-10 bar. Output capacity: 15m³/h. Input thread: W21.8x1 1/4. Output nut thread: G1/4. Pipe connection: 6.3mm. Note! Regulator is not compatible with Elme Messer cylinders.

Professional CO2 Cylinder Dual-Output Regulator-Reducer Precise dual-output CO2 regulator-reducer ensures optimal gas pressure control for industrial applications. The device allows precise regulation of pressure for both outputs separately, ensuring stable and reliable operation. Main features: Adjustable output pressure on both lines. Automatic constant pressure maintenance. Built-in safety valve against overpressure. Two pressure gauges for accurate pressure monitoring. Technical specifications: Standard cylinder connection: W21.8x1 1/4. Two separately adjustable outputs. Equipped with safety valve. Hose connection fittings must be purchased separately if needed.

CO2 Cylinder Regulator-Reducer with Adjustable Output Pressure High-quality CO2 cylinder regulator-reducer ensures precise and reliable gas pressure control. The device allows convenient adjustment of gas pressure from the cylinder according to your work requirements. Main features: Automatic constant pressure maintenance, Built-in safety valve for protection, Two pressure gauges for monitoring, Separately adjustable output pipeline pressures. Technical description: Cylinder connection: W21.8x1 1/4 input thread, First pressure gauge: CO2 cylinder pressure reading, Second pressure gauge: output pipeline pressure reading. Note: hose connection fittings need to be purchased separately if needed. This regulator-reducer is an ideal solution for industrial and professional use where precise gas pressure control is required.

Adjustable Gas Regulator 200 Bar - Professional Pressure Regulator High-quality single-stage cylindrical gas regulator ensures precise and reliable pressure regulation in systems with nominal pressure up to 200 bar. The device's W24,32x1/14 threading enables simple and secure installation. Main features: Maximum nominal pressure: 200 bar Adjustable output pressure Single-stage design Thread type: W24,32x1/14 Reliability and safety: Automatic pressure stabilization Precise output pressure control Stable working pressure maintenance System responsive to input pressure changes This professional gas regulator is ideal for industrial use where precise and reliable pressure regulation is required. The device maintains stable output pressure even during input pressure fluctuations.

CO2 Regulator with two manometers (4.5bar safety valve) This is a Type 30 - MK5 CO2 regulator equipped with two manometers and a 4.5bar safety valve and 65psi gauge. It's a tool-free mounting regulator that allows for easy and quick installation. Latest features: 1. One-handed cylinder attachment. No wrench needed to attach the regulator to the CO2 cylinder. You can easily secure it with the handwheel using one hand. This is possible thanks to the new seal that compresses easily without risk of seal damage or leakage. 2. Self-service maintenance without vices or special equipment. The regulator's internal parts are now smaller and accessible from the back plate. You can now easily disassemble the regulator knob area, which has an M8 hex head, and clean the regulator from any contamination. 3. Output with check valve, ball valve, and integrated 8mm duotight connection. 4. Class 2.5 triple-scale manometers showing kPa, bar, and PSI units (accuracy +-2.5%). 5. Completely new protective cover design. The new protective cover is made of ultra-high molecular density polyethylene. This means that even with heavy use and load by homebrewers (for example during CO2 carbonation), the up-and-down moving cover is less likely to scratch and create brass dust that could otherwise cause pressure rise due to internal contamination. 6. Stronger steel manometers made from thicker steel. 7. Color-coded PRV (pressure relief valves). This unit comes with a 65psi green PRV. It does not include the red 35psi or grey 100psi PRV. 8. M6 mounting holes for easy installation. Note that for flat mounting, you'll need to remove the handwheel as it may interfere with installation. The CO2 regulator is used for controlling carbon dioxide pressure, allowing precise controlled gas flow for carbonating and serving beer or other beverages. It's an essential device for homebrewers and beverage serving.

Ballooniadapter W21.8 väliskeere x TR21-4 sisekeere, Sodastreamile. Ühendage oma 425g Sodastream CO2 balloon mugavalt mis tahes standardse CO2 regulaatoriga, kasutades meie Sodastream ballooniadapterit. Kohandage avamisnõela sügavust hõlpsasti 4mm kuuskantvõtmega, mis tagab ühilduvuse kõigi Euroopas müüdavate balloonitüüpidega. Komplektis on nailontihend. Antud adapter on loodud mugavaks kasutamiseks, võimaldades teil ühendada Sodastream CO2 ballooni erinevate süsteemidega. Adapteri kasutamine on lihtne - kinnitage see otse Sodastream balloonile ja seejärel saate ühendada standardse CO2 regulaatori. Kohandatav avamisnõela sügavus tagab optimaalse ühilduvuse erinevate balloonimudelitega.

Mini DuoTight Balloon Regulator (6.35mm) for 16g and 74g balloons. This regulator is equipped with a 6.35mm duotight compatible connection, allowing you to connect almost anything in just a few seconds. Please note that if liquid passes through the regulator, it becomes unusable. Be especially careful with overfilling kegs or tilting them when the gas runs out. The regulator is limited to 30psi (2.1 bar) to ensure you don't accidentally over-carbonate or exceed the keg's pressure rating. However, the pressure gauge shows up to 60psi (4.1 bar) in case of heat intrusion/expansion to prevent damage to the gauge. Using the regulator is simple: attach the regulator to the gas balloon, connect the hose with the duotight connection, and adjust to desired pressure. The device is ideal for carbonating and serving homebrew beer, allowing precise pressure control.

High-pressure extension hose 180cm, for cylinders. This high-pressure extension hose is designed for use with pressures up to 300 bar. The hose is made with quality brass Type 30 female-male fittings. The extension hose length is 180 cm (1.8 meters). The high-pressure extension hose is manufactured with Type 30 CO2 male thread on one end and Type 30 CO2 female thread on the other end. This useful device allows you to position the pressure regulator away from the gas cylinder. Its purpose is to enable you to place the gas cylinder on the floor and then mount the CO2 regulator on the wall or gas panel where it's convenient and at eye level. The extension hose is particularly useful when assembling your CO2 gas panels. The hose ensures a safe and reliable connection between cylinders and regulators, allowing for more flexible equipment placement. Operating principle: The extension hose connects to the cylinder on one end and to the pressure regulator on the other end, enabling more flexible system configuration and better ergonomics when using gas supply.

CO2 Regulator with two manometers (4.5bar safety valve) This is a Type 30 - MK5 CO2 regulator equipped with two manometers and a 4.5bar safety valve and 65psi gauge. It's a tool-free mounting regulator that allows for easy and quick installation. Latest features: 1. One-handed cylinder attachment. No wrench needed to attach the regulator to the CO2 cylinder. You can easily secure it with the handwheel using one hand. This is possible thanks to the new seal that compresses easily without risk of seal damage or leakage. 2. Self-service maintenance without vices or special equipment. The regulator's internal parts are now smaller and accessible from the back plate. You can now easily disassemble the regulator knob area, which has an M8 hex head, and clean the regulator from any contamination. 3. Output with check valve, ball valve, and integrated 8mm duotight connection. 4. Class 2.5 triple-scale manometers showing kPa, bar, and PSI units (accuracy +-2.5%). 5. Completely new protective cover design. The new protective cover is made of ultra-high molecular density polyethylene. This means that even with heavy use and load by homebrewers (for example during CO2 carbonation), the up-and-down moving cover is less likely to scratch and create brass dust that could otherwise cause pressure rise due to internal contamination. 6. Stronger steel manometers made from thicker steel. 7. Color-coded PRV (pressure relief valves). This unit comes with a 65psi green PRV. It does not include the red 35psi or grey 100psi PRV. 8. M6 mounting holes for easy installation. Note that for flat mounting, you'll need to remove the handwheel as it may interfere with installation. The CO2 regulator is used for controlling carbon dioxide pressure, allowing precise controlled gas flow for carbonating and serving beer or other beverages. It's an essential device for homebrewers and beverage serving.

Gas line distribution manifold with 4 outputs (MFL thread) duotight compatible. These gas distribution manifolds are designed to work with pressures up to 6.9 bar (100 psi) and include 4 gas line outputs with 4 x 1/4-inch (6.35 mm) ball valves with MFL thread. This is a simple and convenient way to create multiple gas lines from a single gas line. You can additionally attach a gas ball lock post with a 1/4-inch (6.35 mm) bulkhead if you want to easily disconnect and reconnect the gas line. Alternatively, you can also install Duotight 8 mm to 1/4-inch (6.35 mm) push-in fittings on this manifold. However, this would lose the advantage of the built-in check valve and the ability to isolate each gas line separately. NOTE: This product is not suitable for beer or other beverages. For gas only. Please note that due to the check valve mechanism, the pressure drops in these manifold ball valves by approximately 0.14 bar (2 psi). The regulator needs to be set about 0.14 bar (2 psi) higher than the desired pressure in the keg. Operating principle: The distribution manifold allows connecting one gas source to four different gas lines. Built-in check valves prevent gas backflow, and ball valves allow individual line closure or opening. This is an ideal solution for simultaneously supplying gas to multiple kegs or devices, ensuring uniform and adjustable gas flow.