Coolung unit CW COMPACT Green Line

Cleaning Keg 10L with Rubber Base, for Beer Lines The 10-liter stainless steel cleaning keg is the simplest way to clean beer lines and keg valves. The keg is equipped with a rubber base for stability. Features: 10-liter (2.64 gallon) capacity, made of high-quality stainless steel, includes rubber base for stability. Technical specifications: 1 x Type A tube with silicone suction tube, 1 x Type D tube with silicone suction tube, 1 x Cornelius type lid with 100psi pressure relief valve. Usage: Fill the cleaning keg with a mixture of StellarClean cleaner and warm water. Connect your beer tap valve similar to a regular keg and open the tap. We recommend letting the cleaning solution sit in the lines for at least 5 minutes, then rinse with warm water. For complete cleaning of lines and stainless steel taps, Stellarsan sanitizer can also be used at a ratio of 1.5 ml per 1 liter of water. Our 10L cleaning keg is fully passivated stainless steel, just like our new 19L kegs. Attention: DO NOT USE BLEACH OR CHLORINATED TSP (PINK POWDER) TO CLEAN KEGLAND STAINLESS STEEL PRODUCTS. TSP pink cleaner contains bleach which damages the stainless steel structure and causes corrosion. Suitable cleaners in proper dilution: StellarOxy, StellarClean, StellarSoda, StellarSan. The cleaning keg allows you to regularly and effectively maintain your beer system, ensuring fresh and clean beer taste always. The cleaning keg is a compact, durable, and reusable solution suitable for both home brewers and smaller bars.

Professional KeyKeg Beer Cooler With Compressor. Efficient compressor cooling system specifically designed for KeyKeg beer kegs, ensuring optimal working pressure of 2.8-3.2 bar. Technical Specifications: Quick setup time: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Cooling tube length: 13.5 meters. Equipped with 1 output tap. Device Dimensions: Width: 170 mm. Length: 280 mm. Height: 325 mm. Weight: 13 kg. Connections and Power Consumption: Hose connections: John Guest 3/8. Power: 267W. Electrical connection: 230V/50Hz/1.16A. Required accessories for installation: Connection fittings for tube and container. CO2 cylinder with pressure 2.5-2.9 bar when using metal kegs.

Professional KeyKeg Compressor Cooler - For Precise Beer Dispensing The efficient compressor cooler ensures optimal working pressure for KeyKeg barrels between 2.8-3.2 bar. The device reaches full operational capacity in just 5-8 minutes after connecting to power. Technical Features: Adjustable temperature range: +2°C to +10°C Cooling capacity: 35-40 liters per hour (maximum 50 l/h) Equipped with two output taps Total cooling pipeline length: 14 meters John Guest 5/8 connection hoses Device Specifications: Dimensions: 210 x 331 x 465 mm (L x W x H) Weight: 29.3 kg Power consumption: 1100W Power supply: 230V/50Hz/1.16A When using metal kegs, it is recommended to set the CO₂ cylinder working pressure between 2.5-2.9 bar. Note: pipe and container fittings must be purchased separately for cooler operation.

SODA PYGMY - Compact Carbonated Water Maker SODA PYGMY is a capable carbonated water maker that produces up to 25 liters of perfectly chilled sparkling or still water per hour. The unit is equipped with a precise thermostat for temperature control and two dispensing taps. Environmentally Friendly Technology GREEN LINE technology uses environmentally friendly refrigerant R-290. Energy-efficient design ensures 20% greater energy efficiency and lower power consumption. Quality Construction The unit's body and coil are made of durable stainless steel that meets the highest hygiene standards. The stainless steel drip tray makes the device convenient and hygienic to use. Technical Specifications Compressor cooling capacity: 310W (1/8 HP). Maximum cooling: 25 L/hour. Continuous cooling: 20 L/hour. Carbonated water output: 20-25 L/hour. Cooling tube length: 11.0 m. Power: 391W. Current: 1.70A. Weight: 19.0 kg. Connections Power supply: 220-240V 50Hz. Beverage connection: G 3/8. CO2 connection: 5/16.

SODA PYGMY 25 GREEN LINE - Professional Carbonated Water Maker SODA PYGMY 25 GREEN LINE is an efficient and environmentally friendly carbonated water maker that produces chilled soda water by mixing H2O and CO2. The device is ideal for under-counter installation and connection to a bar tower or external tap. Main advantages: Productivity: up to 25 liters of perfectly chilled soda water per hour Modern design and easy maintenance Ergonomic handles for safe handling Precise temperature control with thermostat Eco-friendly technology: GREEN LINE technology uses environmentally friendly refrigerant R-290 and an innovative energy-saving system. The result is 20% greater energy efficiency and lower energy consumption. Technical specifications: Compressor power: 1/8 HP Cooling capacity: 310W Continuous cooling: 20 L/hour Carbonated water output: 20-25 L/hour Cooling coil length: 10.5 m Power: 391W Weight: 17 kg Power supply: 220-240V 50Hz SODA PYGMY 25 GREEN LINE is perfectly suited for use in offices, restaurants, and manufacturing facilities, offering an optimal ratio of performance, quality, and dimensions.

Beverage cooler & carbonator Benchy 3.2L without taps, 240V. Benchy Sparkling - countertop/undercounter carbonator/cooler is the simplest way to install a sparkling water system. No ice needed, just connect the device to power, fill with glycol, connect water supply and immediately enjoy carbonated water. Benchy Sparkling is a solution that provides instantly chilled and carbonated water as needed. Simply connect the water supply and CO2 cylinder to the device and get unlimited sparkling and chilled water from the tap. Our Benchy product series is far superior to other market devices in terms of price, ease of use, and flexibility. Using the regulator, you can adjust the carbonation level to your taste, which cannot be done with other similar systems on the market. This device is also significantly more affordable and easier to install. To operate, simply: 1. Connect to power 2. Fill the internal water tank 3. Connect water supply 4. Connect CO2 cylinder 5. Dispense chilled sparkling water. It's that simple, and you can enjoy chilled sparkling water in less than an hour after installation, with rapid cooling. Ensure the device is installed and used according to the user manual found under additional information. Fully adjustable - Benchy Sparkling has an integrated digital temperature controller allowing temperature control from 0.5°C to 10°C. You can also adjust carbonation levels from 0.5 volumes to over 5 volumes for extra sparkling water. Cooling capacity - Benchy Sparkling can cool approximately 20-30 liters of sparkling water per hour (assuming ambient water and air temperature of 20°C). To increase device capacity, you can pre-cool mains water using either a refrigerated container (keg) or G40 cooler. Pre-cooling mains water can more than double Benchy Sparkling output. Technical specifications: Height: 465 mm Width: 290 mm Depth: 520 mm (excluding sight glass which can be removed) Refrigerant: r600a - (80 grams) Cooling power: 600 watts Power consumption: 155 W (standby power consumption less than 5 watts) Capacity: approximately 25 L per hour (assuming 20°C ambient temperature) Gas input: CO2 @ 2-3.5 bar (8 mm (5/16) OD tube) Water input: Must be 1 bar (15 psi) higher than gas pressure (6.35 mm (1/4") OD tube) Sparkling/chilled water output: 8 mm (5/16") OD tube. NOTE: Nukatap FC taps are sold separately for countertop installation.

Professional KeyKeg Compressor Cooler - For Precise Beer Dispensing The efficient compressor cooler ensures optimal working pressure for KeyKeg barrels between 2.8-3.2 bar. The device reaches full operational capacity in just 5-8 minutes after connecting to power. Technical Features: Adjustable temperature range: +2°C to +10°C Cooling capacity: 35-40 liters per hour (maximum 50 l/h) Equipped with two output taps Total cooling pipeline length: 14 meters John Guest 5/8 connection hoses Device Specifications: Dimensions: 210 x 331 x 465 mm (L x W x H) Weight: 29.3 kg Power consumption: 1100W Power supply: 230V/50Hz/1.16A When using metal kegs, it is recommended to set the CO₂ cylinder working pressure between 2.5-2.9 bar. Note: pipe and container fittings must be purchased separately for cooler operation.

SOUDEK 50 Professional Oak Wood Beer Cooler - Three-Tap Cooling System SOUDEK 50 is a high-end beer and wine cooler, perfect for both home use and bars. This premium device allows simultaneous cooling and serving of up to three different beverages. Powerful Cooling System Cooling capacity: 40-50 liters per hour Number of servings: 80-100 glasses per hour Temperature control with thermostat Luxurious Design and Quality Hand-crafted oak wood casing Stainless steel components Compact and elegant appearance Three serving taps Technical Features CO2 system with 2.5-2.9 bar pressure Built-in thermostat for precise temperature control Compact size for easy installation Professional cooling system The SOUDEK 50 beer cooler is an ideal choice for those who want to serve perfectly chilled drinks at a professional level. The device's modern technology and quality finish ensure long-term reliability and aesthetic appearance.

SODA PYGMY - Compact Carbonated Water Maker SODA PYGMY is a capable carbonated water maker that produces up to 25 liters of perfectly chilled sparkling or still water per hour. The unit is equipped with a precise thermostat for temperature control and two dispensing taps. Environmentally Friendly Technology GREEN LINE technology uses environmentally friendly refrigerant R-290. Energy-efficient design ensures 20% greater energy efficiency and lower power consumption. Quality Construction The unit's body and coil are made of durable stainless steel that meets the highest hygiene standards. The stainless steel drip tray makes the device convenient and hygienic to use. Technical Specifications Compressor cooling capacity: 310W (1/8 HP). Maximum cooling: 25 L/hour. Continuous cooling: 20 L/hour. Carbonated water output: 20-25 L/hour. Cooling tube length: 11.0 m. Power: 391W. Current: 1.70A. Weight: 19.0 kg. Connections Power supply: 220-240V 50Hz. Beverage connection: G 3/8. CO2 connection: 5/16.

SODA PYGMY 25 GREEN LINE - Professional Carbonated Water Maker SODA PYGMY 25 GREEN LINE is an efficient and environmentally friendly carbonated water maker that produces chilled soda water by mixing H2O and CO2. The device is ideal for under-counter installation and connection to a bar tower or external tap. Main advantages: Productivity: up to 25 liters of perfectly chilled soda water per hour Modern design and easy maintenance Ergonomic handles for safe handling Precise temperature control with thermostat Eco-friendly technology: GREEN LINE technology uses environmentally friendly refrigerant R-290 and an innovative energy-saving system. The result is 20% greater energy efficiency and lower energy consumption. Technical specifications: Compressor power: 1/8 HP Cooling capacity: 310W Continuous cooling: 20 L/hour Carbonated water output: 20-25 L/hour Cooling coil length: 10.5 m Power: 391W Weight: 17 kg Power supply: 220-240V 50Hz SODA PYGMY 25 GREEN LINE is perfectly suited for use in offices, restaurants, and manufacturing facilities, offering an optimal ratio of performance, quality, and dimensions.

Beverage cooler & carbonator Benchy 3.2L without taps, 240V. Benchy Sparkling - countertop/undercounter carbonator/cooler is the simplest way to install a sparkling water system. No ice needed, just connect the device to power, fill with glycol, connect water supply and immediately enjoy carbonated water. Benchy Sparkling is a solution that provides instantly chilled and carbonated water as needed. Simply connect the water supply and CO2 cylinder to the device and get unlimited sparkling and chilled water from the tap. Our Benchy product series is far superior to other market devices in terms of price, ease of use, and flexibility. Using the regulator, you can adjust the carbonation level to your taste, which cannot be done with other similar systems on the market. This device is also significantly more affordable and easier to install. To operate, simply: 1. Connect to power 2. Fill the internal water tank 3. Connect water supply 4. Connect CO2 cylinder 5. Dispense chilled sparkling water. It's that simple, and you can enjoy chilled sparkling water in less than an hour after installation, with rapid cooling. Ensure the device is installed and used according to the user manual found under additional information. Fully adjustable - Benchy Sparkling has an integrated digital temperature controller allowing temperature control from 0.5°C to 10°C. You can also adjust carbonation levels from 0.5 volumes to over 5 volumes for extra sparkling water. Cooling capacity - Benchy Sparkling can cool approximately 20-30 liters of sparkling water per hour (assuming ambient water and air temperature of 20°C). To increase device capacity, you can pre-cool mains water using either a refrigerated container (keg) or G40 cooler. Pre-cooling mains water can more than double Benchy Sparkling output. Technical specifications: Height: 465 mm Width: 290 mm Depth: 520 mm (excluding sight glass which can be removed) Refrigerant: r600a - (80 grams) Cooling power: 600 watts Power consumption: 155 W (standby power consumption less than 5 watts) Capacity: approximately 25 L per hour (assuming 20°C ambient temperature) Gas input: CO2 @ 2-3.5 bar (8 mm (5/16) OD tube) Water input: Must be 1 bar (15 psi) higher than gas pressure (6.35 mm (1/4") OD tube) Sparkling/chilled water output: 8 mm (5/16") OD tube. NOTE: Nukatap FC taps are sold separately for countertop installation.