Beer Tower T-shaped with 6 taps, stainless steel

Beer Tower T-shaped with 6 taps, stainless steel

Product Overview

T-shaped stainless steel beer dispenser with 6 taps

Achieve an icy look with the new KegLand T-shaped stainless steel series beer dispenser. Now equipped with pre-installed internal hoses, setup couldn't be easier. These cooled dispensers are exactly what you need to set up your bar, café, or event sales point. If six taps are too many for you, we also offer smaller models with 2-4 taps.

When glycol is used instead of water, you can achieve a special freezing point where the beer/cider doesn't freeze, but the outside surface of the dispenser ices up. This depends on the strength of your beverage. If you're dispensing light beer, it may freeze. Using glycol to achieve an icy appearance is not recommended for soda water lines. This T-shaped dispenser is specifically designed to be used with the G80 IceMaster cooler. The G80 has 8 tap connections, so you can double-loop two lines, usually chosen for the two most popular beverages.

Usage principle: The dispenser allows for serving multiple types of beverages simultaneously, keeping them at a chilled temperature while offering an attractive appearance with its frosted surface.

Dimensions

• 430 mm tall when installed (from base flange to top)
• 600 mm wide
• Requires a 70 mm opening for countertop installation

Technical Specifications

• 2 x 10 mm glycol inlet and outlet barbs. Inlet is the lower pipe
• 6 x 4 mm x 8 mm EVABarrier internal hoses
• Twist-locking anchor with three tension bolts
• Can be mounted on surfaces up to 90 mm thick
• Made of 304 stainless steel, coated with a durable glossy finish
• Pre-installed internal hoses with approximately 50 mm extending beyond the base
• Leak testing required after installation

beer dispenser | T-shaped dispenser | stainless steel dispenser | 6-tap dispenser | cooled beer tower | glycol cooling | bar equipment | beverage serving | KegLand dispenser | draft beer system